Horizontal Drilling · Georgia
Horizontal Drilling in Alpharetta, GA
New fiber, power, water, sewer and gas lines reach buildings in Alpharetta underground, and the straight path from the main to the meter runs beneath something expensive almost every time. A directional bore puts the line under all of it from two small pits and leaves the pavement and the landscaping as they were.
Serving Alpharetta · Georgia
Davis Underground Solutions, Inc.
Horizontal drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Horizontal Drilling in Alpharetta: what gets installed
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Alpharetta's data centers, office parks and fiber-rich corridors along GA 400 make it one of the busiest bore markets in the state; the rock is close and the permits run through the city and GDOT District 7.
How a bore in Alpharetta is done
A bore in Alpharetta is planned backward from the product: the bend the pipe can take, the cover the permit requires under the road or the water, and the ground along the path set the entry angle and the length. One or more reaming passes open the pilot hole; the pipe or conduit comes back on the last pass behind a swivel so it does not twist.
Hiring a horizontal drilling contractor in Alpharetta
A good boring contractor in Alpharetta returns the call, walks the site, writes a firm number, and leaves the pits so you cannot find them a week later. That is the standard Davis Underground Solutions, Inc. works to across Georgia, with metro Atlanta as home range and the rest of the state a quoted drive away.
The full write-up for the state is on the horizontal drilling page for Georgia.
Estimates are free. Call now: (678) 264-3333.
Questions about horizontal drilling in Alpharetta
Can the bore be done at night or on a weekend?+
Yes, and on roads with heavy daytime traffic that is often what the permit requires.
Can the bore be done at night or on a weekend?+
Yes, and on roads with heavy daytime traffic that is often what the permit requires.
How soon can a crew be in Alpharetta?+
Metro Atlanta within days; the rest of the state is scheduled with the mobilization and the permit lead time.
Other drilling and boring services in Alpharetta
Directional Drilling Alpharetta
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Directional Boring Alpharetta
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Alpharetta
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Alpharetta
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Electrical Conduit Drilling Alpharetta
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Underground Conduit Drilling Alpharetta
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Alpharetta
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Alpharetta
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Alpharetta
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Alpharetta
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Auger Boring and Drilling Alpharetta
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Sewer, Water and Drain Lines Alpharetta
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Horizontal Drilling in nearby Georgia communities
- Horizontal Drilling Columbus
- Horizontal Drilling Macon
- Horizontal Drilling Savannah
- Horizontal Drilling Athens
- Horizontal Drilling Sandy Springs
- Horizontal Drilling Roswell
- Horizontal Drilling Johns Creek
- Horizontal Drilling Albany
- Horizontal Drilling Warner Robins
- Horizontal Drilling Marietta
- Horizontal Drilling Valdosta
- Horizontal Drilling Smyrna