Skip to content

Directional drilling & boring · Serving all of Georgia

(678) 264-3333

Davis Underground Solutions, Inc. Davis Underground Solutions, Inc.

Drilling & boring

Missile boring in Georgia

The smallest tool on the truck: a pneumatic mole for a short, straight bore under a driveway or a walk when that is all the job needs.

Call (678) 264-3333Estimates are free. Call now.
Davis Underground Solutions, Inc.

Serving all of Georgia

Davis Underground Solutions, Inc.

Directional drilling and boring across Georgia; locates, bore plan and utility coordination handled. More about Davis Underground Solutions →

(678) 264-3333

What a missile bore is

A missile, or pneumatic piercing tool, is a compressed-air hammer that drives itself through the soil from a launch pit, compacting the ground around it and leaving a hole the size of the tool. It is not steered; it goes where it is aimed. For a short, straight, shallow crossing with nothing in the way, it is the fastest and least expensive way to get a small pipe or conduit under a driveway or a sidewalk in Georgia.

When it fits

  • Service lines and sleeves up to a few inches under driveways, walks and small roads.
  • Irrigation, lighting and dog-fence sleeves under patios and pavers.
  • Gas and water services from the meter to the house across a lawn.
  • Short conduit to a sign, a gate or a pole across a drive aisle.

When a steered bore is the better tool

Rock, which stops a missile cold; longer or deeper runs; anything that must miss a utility in the path; a run that needs a curve. Davis Underground Solutions, Inc. brings both the missile and the directional rig and uses the one the job calls for, which is why the estimate starts with the address and the ground.

Ground

Georgia is three different drilling states stacked on top of each other. North of the Fall Line, which runs roughly Columbus to Macon to Augusta, the Piedmont puts red clay over saprolite over granite and gneiss, and the rock can sit a few feet down or forty. South of that line the Coastal Plain is sand, clay and marl with a high water table and almost no rock. In the northwest corner the ridges are limestone and shale, with the caves to prove it. The bit, the fluid and the production rate all change with the region, which is why the first question on any estimate is the address.

Who comes out

Davis Underground Solutions, Inc. is headquartered in Powder Springs, west of Atlanta, and runs the whole state. Metro Atlanta and the counties around it are home range with no mobilization fee; Columbus, Macon, Augusta, Savannah, Albany, Valdosta and everywhere between are a quoted mobilization and a crew that has already been there. Being the drilling company that actually picks up the phone and shows up is most of why the company works across Georgia. Davis Underground Solutions has the equipment list. Estimates are free. Call now: (678) 264-3333.

Estimates are free. Call now: (678) 264-3333.

Other drilling and boring services in Georgia

Directional Drilling Georgia

Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.

Horizontal Drilling Georgia

Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.

Directional Boring Georgia

Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.

Underground Drilling Georgia

Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.

Fiber Optic Cable Drilling Georgia

Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.

Electrical Conduit Drilling Georgia

PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.

Underground Conduit Drilling Georgia

Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.

Structured Cable Drilling Georgia

Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.

Utility Drilling Georgia

Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.

Communications Drilling Georgia

Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.

Auger Boring and Drilling Georgia

Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.

Sewer, Water and Drain Lines Georgia

New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.

Questions about missile boring in Georgia

How far can a missile bore go?+

Short runs, typically a driveway or a two-lane road; longer runs go to the directional rig.

What size pipe?+

Small services and sleeves, up to a few inches, depending on the tool.

Does it work in Georgia clay?+

Well in moist clay and sand; not in rock or dry hardpan, where a steered bore is used instead.

Is it accurate?+

For a short straight shot, yes; it cannot steer, so a utility in the path means a different method.

Estimate?+

Free. Call (678) 264-3333 or send the run through the form.

Missile Boring by city in Georgia

Each community has its own page for this service. The crew, the method and the price are the same across the state; the page covers what is different about the ground and the permits there.

Free Estimates

Tell us what needs to go in the ground in Georgia.

Length of the run, what is being installed (conduit, duct, water, sewer, gas), what it has to cross, and where the plans stand. A crew that bores for a living can usually price it from that and a site walk.

Estimates are free. Call now. (678) 264-3333
  • ✓ Road, driveway, creek and rail crossings without cutting the surface
  • ✓ Conduit, duct, casing and product pipe from 2" to large diameter
  • ✓ Locates, bore plans and utility coordination handled
  • ✓ Crews travel; a mobilization fee is quoted up front on far jobs

Request a free estimate

Goes straight to Davis Underground Solutions. You will hear back within 24 hours.

No obligation. Your details go only to the drilling contractor handling your area.