Electrical Conduit Drilling · Georgia
Electrical Conduit Drilling in Alpharetta, GA
New fiber, power, water, sewer and gas lines reach buildings in Alpharetta underground, and the straight path from the main to the meter runs beneath something expensive almost every time. A directional bore puts the line under all of it from two small pits and leaves the pavement and the landscaping as they were.
Serving Alpharetta · Georgia
Davis Underground Solutions, Inc.
Electrical conduit drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Electrical Conduit Drilling in Alpharetta: what gets installed
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Alpharetta's data centers, office parks and fiber-rich corridors along GA 400 make it one of the busiest bore markets in the state; the rock is close and the permits run through the city and GDOT District 7.
How a bore in Alpharetta is done
The job in Alpharetta starts before the rig arrives: the Georgia 811 ticket, a walk of the alignment, and a bore plan that threads the marked utilities and anything the locate cannot see. The pilot hole is drilled with a steerable head and tracked from the surface rod by rod, reamed to size, and the product is pulled back in one pass. Rock or sand changes the bit and the pace, not the method.
Hiring a electrical conduit drilling contractor in Alpharetta
The contractor for a bore in Alpharetta should be able to say what the ground is before the rig is unloaded, show the tracking log for every rod, and hand back conduit that is proofed and capped. Davis Underground Solutions, Inc. does all of that as a matter of routine, on its own equipment, anywhere in the state.
The full write-up for the state is on the electrical conduit drilling page for Georgia.
Estimates are free. Call now: (678) 264-3333.
Questions about electrical conduit drilling in Alpharetta
Can the bore hold the bend radius the code requires?+
Yes. The entry and exit angles and the depth are planned around the conduit's minimum radius before the rig is set.
Can the bore hold the bend radius the code requires?+
Yes. The entry and exit angles and the depth are planned around the conduit's minimum radius before the rig is set.
Is the estimate for Alpharetta free?+
Yes. Call (678) 264-3333 now or send the run through the form on this page.
Other drilling and boring services in Alpharetta
Directional Drilling Alpharetta
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Alpharetta
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Alpharetta
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Alpharetta
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Alpharetta
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Underground Conduit Drilling Alpharetta
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Alpharetta
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Alpharetta
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Alpharetta
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Alpharetta
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Auger Boring and Drilling Alpharetta
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Sewer, Water and Drain Lines Alpharetta
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Electrical Conduit Drilling in nearby Georgia communities
- Electrical Conduit Drilling Columbus
- Electrical Conduit Drilling Macon
- Electrical Conduit Drilling Savannah
- Electrical Conduit Drilling Athens
- Electrical Conduit Drilling Sandy Springs
- Electrical Conduit Drilling Roswell
- Electrical Conduit Drilling Johns Creek
- Electrical Conduit Drilling Albany
- Electrical Conduit Drilling Warner Robins
- Electrical Conduit Drilling Marietta
- Electrical Conduit Drilling Valdosta
- Electrical Conduit Drilling Smyrna