Utility Drilling · Georgia
Utility Drilling in Sandy Springs, GA
A drilling crew's work in Sandy Springs is the line that has to cross something it cannot cut: a state route, a railroad, a driveway, a creek with a buffer, a lot full of cars. A pit at each end, a steered bore between them, and the pipe or conduit is pulled back with the surface untouched.
Serving Sandy Springs · Georgia
Davis Underground Solutions, Inc.
Utility drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Utility Drilling in Sandy Springs: what gets installed
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Sandy Springs is north Fulton granite under a city that resurfaced most of its streets recently and guards them; Roswell Road and GA 400 crossings are the common ask.
How a bore in Sandy Springs is done
The job in Sandy Springs starts before the rig arrives: the Georgia 811 ticket, a walk of the alignment, and a bore plan that threads the marked utilities and anything the locate cannot see. The pilot hole is drilled with a steerable head and tracked from the surface rod by rod, reamed to size, and the product is pulled back in one pass. Rock or sand changes the bit and the pace, not the method.
Hiring a utility drilling contractor in Sandy Springs
The contractor for a bore in Sandy Springs should be able to say what the ground is before the rig is unloaded, show the tracking log for every rod, and hand back conduit that is proofed and capped. Davis Underground Solutions, Inc. does all of that as a matter of routine, on its own equipment, anywhere in the state.
The full write-up for the state is on the utility drilling page for Georgia.
Estimates are free. Call now: (678) 264-3333.
Questions about utility drilling in Sandy Springs
Casing under GDOT routes?+
Yes, to the GDOT utility accommodation requirements, with the casing size the permit calls for.
Casing under GDOT routes?+
Yes, to the GDOT utility accommodation requirements, with the casing size the permit calls for.
Is the estimate for Sandy Springs free?+
Yes. Call (678) 264-3333 now or send the run through the form on this page.
Other drilling and boring services in Sandy Springs
Directional Drilling Sandy Springs
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Sandy Springs
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Sandy Springs
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Sandy Springs
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Sandy Springs
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Electrical Conduit Drilling Sandy Springs
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Underground Conduit Drilling Sandy Springs
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Sandy Springs
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Communications Drilling Sandy Springs
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Sandy Springs
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Auger Boring and Drilling Sandy Springs
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Sewer, Water and Drain Lines Sandy Springs
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Utility Drilling in nearby Georgia communities
- Utility Drilling Valdosta
- Utility Drilling Smyrna
- Utility Drilling Dunwoody
- Utility Drilling Rome
- Utility Drilling Gainesville
- Utility Drilling Peachtree City
- Utility Drilling Dalton
- Utility Drilling Statesboro
- Utility Drilling Brunswick
- Utility Drilling Lawrenceville
- Utility Drilling Kennesaw
- Utility Drilling Atlanta