Auger Boring and Drilling · Georgia
Auger Boring and Drilling in Atlanta, GA
New fiber, power, water, sewer and gas lines reach buildings in Atlanta underground, and the straight path from the main to the meter runs beneath something expensive almost every time. A directional bore puts the line under all of it from two small pits and leaves the pavement and the landscaping as they were.
Serving Atlanta · Georgia
Davis Underground Solutions, Inc.
Auger boring and drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Auger Boring and Drilling in Atlanta: what gets installed
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Inside Atlanta the obstacle is a street the city will not let anyone cut, a MARTA or rail crossing, a creek buffer or a parking deck; the granite is predictable and the permit is the long part. Home range for the crew, no mobilization.
How a bore in Atlanta is done
The job in Atlanta starts before the rig arrives: the Georgia 811 ticket, a walk of the alignment, and a bore plan that threads the marked utilities and anything the locate cannot see. The pilot hole is drilled with a steerable head and tracked from the surface rod by rod, reamed to size, and the product is pulled back in one pass. Rock or sand changes the bit and the pace, not the method.
Hiring a auger boring and drilling contractor in Atlanta
The contractor for a bore in Atlanta should be able to say what the ground is before the rig is unloaded, show the tracking log for every rod, and hand back conduit that is proofed and capped. Davis Underground Solutions, Inc. does all of that as a matter of routine, on its own equipment, anywhere in the state.
The full write-up for the state is on the auger boring and drilling page for Georgia.
Estimates are free. Call now: (678) 264-3333.
Questions about auger boring and drilling in Atlanta
How accurate is the grade?+
Within the tolerance a gravity sewer needs; the machine is set on line and grade in the pit and checked as it advances.
How accurate is the grade?+
Within the tolerance a gravity sewer needs; the machine is set on line and grade in the pit and checked as it advances.
Is the estimate for Atlanta free?+
Yes. Call (678) 264-3333 now or send the run through the form on this page.
Other drilling and boring services in Atlanta
Directional Drilling Atlanta
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Atlanta
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Atlanta
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Atlanta
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Atlanta
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Electrical Conduit Drilling Atlanta
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Underground Conduit Drilling Atlanta
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Atlanta
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Atlanta
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Atlanta
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Atlanta
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Sewer, Water and Drain Lines Atlanta
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Auger Boring and Drilling in nearby Georgia communities
- Auger Boring and Drilling Marietta
- Auger Boring and Drilling Valdosta
- Auger Boring and Drilling Smyrna
- Auger Boring and Drilling Dunwoody
- Auger Boring and Drilling Rome
- Auger Boring and Drilling Gainesville
- Auger Boring and Drilling Peachtree City
- Auger Boring and Drilling Dalton
- Auger Boring and Drilling Statesboro
- Auger Boring and Drilling Brunswick
- Auger Boring and Drilling Lawrenceville
- Auger Boring and Drilling Kennesaw